YAMAHA RM-CR Remote Conference Processor
-
DESCRIPTION
RM-CR Remote Conference Processor
Signal processor at the heart of the ADECIA
Remote conference processors to easily resolve several difficult problems associated with troublesome wiring, establishing network environments, and optimizing acoustics for each room environment.
- Standard network audio support for "Dante"; all compatible devices can be connected with single network cable
- Automatically recognizes connected devices on the same network for audio routing
- Equipped with the Auto Tuning functions that automatically measure and provide the optimum sound settings for the environment
- Equipped with the Auto Mixer functions that automatically mix the audio of all connected microphones
- Equipped with various Input/Output connections such as USB, VoIP, analog, and Bluetooth
Certified by Strategic Partners
YAMAHA ADECIA Ceiling Solution is a complete and customizable audio solution for remote conferencing and collaboration and can be used in a wide variety of locations and situations. Every word is captured even if more people are moving in a room and speaking at the same time.
Specs :
GeneralDimensions W 215 mm ? D 260 mm ? H 44 mm Weight 1.6 kg Supported OS Windows 11, Windows 10 (32 bit/64 bit), Windows 8.1 (32 bit/64 bit), macOS 12, macOS 11, macOS 10.15 Power Requirements PoE+ (IEEE 802.3at, LLDP), DC 48 V Maximum Power Consumption 15.0 W Connector RJ 45, USB, XLR balanced, RCA In Operation Temperature0 - 40 C Humidity30 % - 90 % (No condensation) Storage Temperature -20 - 60C Humidity 20 % - 90 % (No condensation) Indicator Power Indicator, Status Indicator, Bluetooth Indicator, Network Port Indicator (x3) Mount Table Mount, Rack Mount Accessories Installation Manual, USB Cable (A-B) 5 m (16.4 ft), USB Cable (A-micro B) 1 m (3.3 ft), 4x Rubber foot, Access Panel Options RM-MTL: Table Mount Kit, RM-MRK: Rack Mount Kit Network Specifications Ether1 Dante Audio/Dante Control, Remote Control, WebUI, PoE+ Ether2/Ether3 Corporate Network, Remote Control, SIP, Web UI USB USB2.0, Network Class, Web UI, Fixed IP Audio Specifications Audio I/O Dante 16in/16out USB USB2.0, Audio Class 1.0, Input: 2 ch, Output: 2 ch @48 kHz Mic Input XLR balanced, Input 2 ch AUX RCA unbalanced (Line Level), Input: 2 ch, Output: 2 ch Speaker Out RCA unbalanced (Line Level), Output: 2 ch Bluetooth VersionBluetooth 4.2 Supported Profiles HFP (1.6), A2DP, AVRCP Supported Codec CVSD, SBC, mSBC Wireless Output Class2 Maximum Communication Distance 10 m (32.8 ft) (no obstacles) Radio Frequency (Operational Frequency) 2,402 to 2,480 MHz Maximum Output Power (EIRP) 4.0 dBm (2.5 mW) SIP Call Handling Dial, Answer, Hold, Resume, Forwarding, Do not disturb, Call ID, Voice Mail Notifications (switch configured) Call Bridging Supports Bridging SIP, USB, BT and AUX Calls. Join, Split, Hold, Resume, 5+1 Lines: Up to 2 SIP calls, 1 USB call, 1 Bluetooth Call, 1 AUX, plus the user Codecs G.711, G.722HD, G.729ab, G.726 DTMF Support RTP event, SIP in-band, SIP info package Security SRTP Support (RFC 1889), IETF SIP support(RFC 3261 and companion RFCs) Sampling Rate 48 kHz Bit Depth 24 bit Latency 8 [ms] (Dante In to USB Out, includes signal processing) Frequency Response 20 Hz – 20 kHz Standard network audio support for Dante—all compatible devices can be connected with single network cable
Uses the Dante audio network standard for audio transmission between devices. Audio/control signals can be transmitted via a single network cable. The RM-CR Remote Conference Processor performs voice line settings and detailed adjustments automatically, which easily resolves several difficult problems associated with troublesome wiring, establishing network environments, and optimizing acoustics for each room environment.
Power supply uses the PoE method, enabling power to be supplied via a network cable
Power supply uses the PoE method. Together with the RM-CG Ceiling Array Microphone and Dante/PoE-compatible VXL Series Model P line array speakers, the RM-CR uses power supplied from the PoE-compatible SWR2311P-10G network switch via a network cable, sparing you any worry about compatibility with various devices.
Automatically recognizes connected devices on the same network for audio routing
All it takes is a click in your web browser. The setup wizard automatically performs audio routing in your system. This minimizes the enormous amount of time required for adjustment, and can be easily set without knowledge or experience of acoustics.
Equipped with Auto Tuning functions to automatically measure and provide the optimum sound settings for the environment
By automatically recognizing devices connected to the same network as the RM-CR, analyzing the acoustic environment of the room where it is installed and the state of any installed speakers, and automatically optimizing the parameters of signal processing technology, etc., the Auto Tuning function adjusts for optimum sound that makes hearing and speaking easy.
Equipped with Auto Mixer functions to automatically optimize the mixing balance of audio input via Dante
Equipped with Auto Mixer functions that allow you to select either gain-sharing type* or gate type, enabling input level balance to be actively adjusted from each microphone.
*Gain-sharing type does not require complicated settings such as threshold level, attack time, or hold time.
Equipped with various input/output connections such as USB, VoIP, analog, and Bluetooth, compatible with diverse applications
Equipped with various interfaces such as USB, Bluetooth®, and audio input/output, the system can be used not only for web conferencing but also for other remote conferencing applications such as video conferencing and conference calls. As it’s compatible with Windows, macOS, iOS and Android, there are no restrictions on the web conferencing system used. Remote communication solutions can be constructed in combination with any OS, device, or teleconferencing system.
RM-CR Auto Setup
Follow the setup wizard on your web browser and with just a few clicks it will automatically adjust the audio according to your system’s audio routing and room environment. This minimizes the enormous amount of time required for adjustment, and can be easily set without knowledge or experience of acoustics.
Settings screen: Password, network, region, peripherals, SIP, and Bluetooth settings can be changed here.
Audio screen: Input/output can be checked and auto tuning can be carried out here. (Manual setting (or detailed setting) of signal processing parameters is not supported as of February 2020. This will be supported at a later date.)
Tools screen: Firmware can be updated and device information can be checked here. Firmware updates can be carried out not only for the RM-CR itself, but also for connected RM series firmware. Save/recall settings and log settings can also be changed on the Tools screen.
Smart Looks and Flexible Design for Custom Control Panels
No specialized programming skills are required. An intuitive interface makes it easy to create
- See Also
-
Already in cart
Audio - Video Collaboration
YAMAHA RM-MRK Rack Mount kit for RM-CR
Yamaha
Code CRMMRK129.00 € -
Already in cart
Audio - Video Collaboration
YAMAHA RM-MTL Table Mount kit for RM-CR
Yamaha
Code CRMMTL129.00 €
